M-EI-UI
- M 42 - M 102b Coilformer Elements
- EJ 38 - EJ 96b Coilformer Elements
- UJ 48 Coilformer Elements
- Frame r for M, EJ, UJ Coilformer Elements
- Housing i for M, EJ, UJ Coilformer Elements
- Housing d for M, EJ Coilformer Elements
- Housing g for M, EJ, UJ Coilformer Elements. Housing c for M Coilformer Elements.
- Ordering Example
- Additional Product Informations
This catalogue contains information on all our product range of the M-EI-UI-Series (safety class coilformers for laminations)
The safety class coilformer series is characterized by extreme flexibility in the individual grouping of the components. Individual standard components can be combined with each other as required to give your own special customized model.
Three different designs, optimized to suit the fields of application, guarantee compliance with the requirements of the relevant standards by observing required insulation distances.
In principle, in all three designs the primary and secondary areas can be wound in separate working steps, an advantage as regards economic installation and planning. Different connection systems and optimized accessories such as, e.g. thermoclips make for easier and more rational processing.
Our extensive range of modular tooling allows almost unlimited constructional changes to meet customers specification, often by simple changes of tool inserts.In addition the modular tooling system allows extremely short tooling times and can be very cost effective.
We are also available to discuss basic questions you may have concerning the use of safety class components. Should you need further assistance we look forward to hearing from you.
M 42 - M 102b Coilformer Elements
The components are made in gfr Polyamide PA66 of type p6g (RTI long-range temperature +125°C). Pin material is tin bronze, tinned or brass, tinned for tags. Maximum solder temperature 350°C, 2 sec.
Special materials - e.g. irradiated cross-linked - and designs on request, dimensions in mm/inch.
The coilformer elements are sorted according to size. The primary and secondary areas can be wound in separate working steps and the design also permits different connection systems.
The selection of components listed below and marked according to design A, B or C is essential to a complete coilformer.
EJ 38 - EJ 96b Coilformer Elements
The components are made in gfr Polyamide PA66 of type p6g (RTI long-range temperature +125°C). Pin material is tin bronze, tinned or brass, tinned for tags. Maximum solder temperature 350°C, 2 sec.
Special materials - e.g. irradiated cross-linked - designs on request, dimensions in mm/inch.
The coilformer elements are sorted according to size.
The primary and secondary areas can be wound in separate working steps and the design also permits alternative connection systems.
The selection of components listed below is essential to a complete coilformer. The design are marked A, B or C.
UJ 48 Coilformer Elements
The components are made in gfr Polyamide PA66 of type p6g (RTI long-range temperature +125°C).
Special materials - e.g. irradiated cross-linked - and designs on request, dimensions in mm/inch.
The coilformer elements are sorted according to size. The primary and secondary areas can be wound in separate working steps and the design also permits different connection systems.
The selection of components listed below and marked according to design A, B or C is essential to a complete coilformer.
Frame r for M, EJ, UJ Coilformer Elements
The components are made in gfr Polyamide PA66 of type p6g (RTI long-range temperature +125°C).
Special materials - e.g. irradiated cross-linked - and designs on request, dimensions in mm/inch.
The frames are sorted according to size and type. When using design A or C, a frame r is required to ensure the creepage and clearance distances between the primary and the secondary winding.
When ordering, please quote type and order-code.
Housing i for M, EJ, UJ Coilformer Elements
The components are made in gfr Polyamide PA66 of type p6g (RTI long-range temperature +125°C). Special materials - e.g. irradiated cross-linked - and designs on request, dimensions in mm/inch.
The housings are sorted according to size and type. When using design A, a housing i is required to ensure the creenpage and clearance distances between the windings and the core assembly and to fix in position the coilformer elemnts / frame.
Alternative housting designs.
t (thermal feet), u ( two fixing straps) and f (four fixing straps) for later fixing in position of the complete transformer are available.
When ordering, please quote type and order-code.
Housing d for M, EJ Coilformer Elements
The components are made in gfr Polyamide PA66 of type p6g (RTI long-range temperature +125°C.)
Special materials - e.g. irradiated cross-linked - and designs on request, dimensions in mm/inch.
The housings are sorted according to size and type. The coilformer elements are each inserted from two sides into the housing .
When using design B, a housing d is required to ensure the creepage and clearance distances between the primary and the secondary windings and between the windings and the core assembly.
When ordering, please quote type and order-code.
Housing g for M, EJ, UJ Coilformer Elements. Housing c for M Coilformer Elements.
The components are made in gfr Polyamide PA66 of type p6g (RTI long-range temperature +130°C).
Special materials - e.g. irradiated cross-linked - and designs on request, dimensions in mm/inch.
The housings are sorted according to size and type. When using design C, two housing elements g or two housing elements c are required to ensure the creepage and clearance distances between the windings and the core laminations.
When ordering, please quote type and order-code.
Ordering Example
Please kindly take all details which are necessary to execute your order correctly from the ordering example (pdf-file).
Additional Product Informations
For explanatory and more detailed information on this coilformer-series please kindly see the attached pdf-file.
- Information of M-EI-UI-Series
- Comments on the safety class designs A (xyi) and B (xyd)
- Comments on the safety class designs C (xyg/xyc)
- Survey of solder-pins and solder-tags
- Information of NORWE Thermoclip
- Lamination
- List of Thermoplastic Materials
- Description Irradiation Cross-Linking
