Component - Plastics E41871 
BASF SE
ENGINEERING PLASTICS EUROPE, E-PME/MP - H201, LUDWIGSHAFEN 67056 DE
A3X2G10, A3X3G10, A3X2G10 LF
Polyamide 66 (PA66), "Ultramid", furnished as pellets
 Min ThkFlame  RTIRTIRTI
Color(mm)ClassHWIHAIElecImpStr
NC, BK0.40V-241656565
NC, BK, GY0.75V-211110115130
NC, GY1.5V-001115115130
 3.0V-001115115130
BK1.5V-0, 5VA01115115130
 3.0V-0, 5VA01115115130
Comparative Tracking Index (CTI):0Inclined Plane Tracking (IPT):-
Dielectric Strength (kV/mm):21Volume Resistivity (10x ohm-cm) :13
High-Voltage Arc Tracking Rate (HVTR):0High Volt, Low Current Arc Resis (D495):5
Dimensional Stability (%):0  
ANSI/UL 94 small-scale test data does not pertain to building materials, furnishings and related contents. ANSI/UL 94 small-scale test data is intended solely for determining the flammability of plastic materials used in the components and parts of end-product devices and appliances, where the acceptability of the combination is determined by UL.
Report Date: 1974-10-24
Last Revised: 2014-10-07
© 2014 UL LLC



IEC and ISO Test Methods
Test NameTest MethodUnitsThk (mm)Value
FlammabilityIEC 60695-11-10, IEC 60695-11-20Class (color)0.40V-2 (NC, BK)
   0.75V-2 (NC, BK, GY)
   1.5V-0 (NC, GY)
   3.0V-0 (NC, GY)
   1.5V-0, 5VA (BK)
   3.0V-0, 5VA (BK)
Glow-Wire Flammability (GWFI)IEC 60695-2-12C--
Glow-Wire Ignition (GWIT)IEC 60695-2-13C--
IEC Comparative Tracking IndexIEC 60112Volts (Max)--
IEC Ball PressureIEC 60695-10-2C--
ISO Heat Deflection (1.80 MPa)ISO 75-2C--
ISO Tensile StrengthISO 527-2MPa--
ISO Flexural StrengthISO 178MPa--
ISO Tensile ImpactISO 8256kJ/m2--
ISO Izod ImpactISO 180kJ/m2--
ISO Charpy ImpactISO 179-2kJ/m2--

back

Download PDF