Component - PlasticsE41797
TORAY INDUSTRIES INC
NIHONBASHI-MITSUI TOWER, 1-1 NIHONBASHI-MUROMACHI 2-CHOME, CHUO-KU TOKYO 103-8666 JP
A504X90, A504X95, A504FG1, A504, A504CX1, A504CX2 (R)
Polyphenylene Sulfide (PPS) "Torelina", furnished as pellets

Color
Min. Thk
(mm)
Flame
Class

HWI

HAI
RTI
Elec
RTI
Imp
RTI
Str
ALL0.28V-0--130130130
0.71V-011200200200
1.5V-001220200210
3.0V-000220200210
Comparative Tracking Index (CTI):4Inclined Plane Tracking (IPT) kV:-
Dielectric Strength (kV/mm):21Volume Resistivity (10x ohm-cm):16
High-Voltage Arc Tracking Rate (HVTR):1Surface Resistivity (10x ohms/square):-
Dimensional Change (%):0.0High Volt, Low Current Arc Resis (D495):5
(R) - Virgin and regrind up to 50% by weight inclusive have the same V-0 flammability and tensile impact characteristics when used within the 130 C generic temperature limitation: no other properties for regrind 26-50% by wt. incl. have been determined.
NOTE - Polyamide (nylon) grades may be prefixed with the letters CM and may employ hyphens in various locations. The designations of ECODEAR products may employ hyphens and/or spaces in various locations. All grades that include ABS, SAN, and/or PC (designations of TOYOLAC or TOYOLACPAREL or TORAYCA products) may employ hyphens and/or spaces and may be suffixed with 3 or 4 digits of letters and/or numbers.
ANSI/UL 94 small-scale test data does not pertain to building materials, furnishings and related contents. ANSI/UL 94 small-scale test data is intended solely for determining the flammability of plastic materials used in the components and parts of end-product devices and appliances, where the acceptability of the combination is determined by UL.
Report Date:1994-07-14© 2022 UL Solutions
Last Revised:2022-11-07
 
IEC and ISO Test Methods
Test NameTest MethodUnitsThk (mm)Value
FlammabilityIEC 60695-11-10Class (color)0.28V-0 (ALL)
0.71V-0 (ALL)
1.5V-0 (ALL)
3.0V-0 (ALL)
Glow-Wire Flammability (GWFI)IEC 60695-2-12°C--
Glow-Wire Ignition (GWIT)IEC 60695-2-13°C--
IEC Comparative Tracking IndexIEC 60112Volts (Max)--
IEC Ball PressureIEC 60695-10-2°C--
ISO Heat Deflection (1.80 MPa)ISO 75-2°C--
ISO Tensile StrengthISO 527-2MPa--
ISO Flexural StrengthISO 178MPa--
ISO Tensile ImpactISO 8256kJ/m2--
ISO Izod ImpactISO 180kJ/m2--
ISO Charpy ImpactISO 179-1kJ/m2--

back

Download PDF