Component - Plastics | E116324 | |
RADICINOVACIPS SPA | ||
VIA BEDESCHI 20, CHIGNOLO D'ISOLA BG 24040 IT | ||
Radiflam A RV250 AF(k)(f1) | ||
Polyamide 66 (PA66), furnished as granular material |
Color | Min. Thk (mm) | Flame Class | HWI | HAI | RTI Elec | RTI Imp | RTI Str |
NC, BK | 0.75 | V-0 | 1 | 0 | 115 | 100 | 130 |
1.5 | V-0, 5VA | 1 | 0 | 115 | 100 | 130 | |
3.0 | V-0, 5VA | 1 | 0 | 115 | 100 | 130 |
Comparative Tracking Index (CTI): | 1 | Inclined Plane Tracking (IPT) kV: | - |
Dielectric Strength (kV/mm): | 5 | Volume Resistivity (10x ohm-cm): | - |
High-Voltage Arc Tracking Rate (HVTR): | 1 | Surface Resistivity (10x ohms/square): | - |
Dimensional Stability (%): | - | High Volt, Low Current Arc Resis (D495): | 6 |
(f1) - | Suitable for outdoor use with respect to exposure to Ultraviolet Light, Water Exposure and Immersion in accordance with UL 746C. |
(k) - | May or may not be followed by numbers from 300 to 399 indicating black color or by numbers from 800 to 899 indicating natural color. Natural may appear to be brown. |
ANSI/UL 94 small-scale test data does not pertain to building materials, furnishings and related contents. ANSI/UL 94 small-scale test data is intended solely for determining the flammability of plastic materials used in the components and parts of end-product devices and appliances, where the acceptability of the combination is determined by UL. |
Report Date: | 1990-03-28 | © 2021 UL LLC | ![]() |
Last Revised: | 2021-02-02 |
IEC and ISO Test Methods | ||||
Test Name | Test Method | Units | Thk (mm) | Value |
Flammability | IEC 60695-11-10, IEC 60695-11-20 | Class (color) | 0.75 | V-0 (NC, BK) |
1.5 | V-0, 5VA (NC, BK) | |||
3.0 | V-0, 5VA (NC, BK) | |||
Glow-Wire Flammability (GWFI) | IEC 60695-2-12 | °C | 0.75 | 960 |
1.5 | 960 | |||
3.0 | 960 | |||
Glow-Wire Ignition (GWIT) | IEC 60695-2-13 | °C | 0.75 | 700 |
1.5 | 675 | |||
3.0 | 800 | |||
IEC Comparative Tracking Index | IEC 60112 | Volts (Max) | - | - |
IEC Ball Pressure | IEC 60695-10-2 | °C | - | - |
ISO Heat Deflection (1.80 MPa) | ISO 75-2 | °C | - | - |
ISO Tensile Strength | ISO 527-2 | MPa | - | - |
ISO Flexural Strength | ISO 178 | MPa | - | - |
ISO Tensile Impact | ISO 8256 | kJ/m2 | - | - |
ISO Izod Impact | ISO 180 | kJ/m2 | - | - |
ISO Charpy Impact | ISO 179-1 | kJ/m2 | - | - |