| Component - Plastics | E41938 |
| CELANESE INTERNATIONAL CORP - Florence | |
| 8040 DIXIE HWY, FLORENCE, KY 41042-2904 United States | |
| FR530(l)(+)(f1), FR530L(l)(+)(f1) | |
| Polyethylene Terephthalate (PET) "Rynite", glass reinforced, flame retardant, furnished as pellets |
|
Color
|
Min. Thk
(mm)
|
Flame
Class
|
HWI
(PLC)
|
HAI
(PLC)
|
GWIT
(°C)
|
GWFI
(°C)
|
RTI Elec
(°C)
|
RTI Imp
(°C)
|
RTI Str
(°C)
|
|---|---|---|---|---|---|---|---|---|---|
| NC, BK | 0.35 | V-0 | 3 | 1 | -- | -- | 155 | 155 | 155 |
| ALL | 0.75 | V-0 | 2 | 1 | 800 | 960 | 155 | 155 | 155 |
| NC, BK | 1.5 | V-0, 5VA | 0 | 1 | 800 | 960 | 155 | 155 | 155 |
| ALL | 2.0 | V-0, 5VA | 0 | 1 | 985 | 960 | 155 | 155 | 155 |
| 3.0 | V-0, 5VA | 0 | 1 | 985 | 960 | 155 | 155 | 155 |
| Comparative Tracking Index (CTI) (PLC): | 2 | IEC Comparative Tracking Index (V): | -- | IEC CTI Material Group: | -- |
| Inclined Plane Tracking (IPT) (kV): | -- | High-Voltage Arc Tracking Rate (HVTR) (PLC): | 1 | Dielectric Strength (DS) (kV/mm): | 34 |
| Volume Resistivity (VR) (10x ohm cm): | 16 | Surface Resistivity (SR) (10x ohms/square): | -- | High Volt, Low Current Arc Resis (D495): | 6 |
| (+) - Use of Regrind up to 50% by weight inclusive, has the same basic material characteristics. (f1) - Suitable for outdoor use with respect to exposure to Ultraviolet Light, Water Exposure and Immersion in accordance with UL 746C. (l) - Recognized ground insulation component at 0.4 mm with MW79 in UL1446 Class 155 electrical insulation system designated R201N (File E69939). (1) Material designations that are color pigmented may be followed by suffix letters and numbers. (2) may be prefixed by ZYT for Zytel or MIN for Minlon or CRA for Crastin or RYN for Rynite. |
| ANSI/UL 94 small-scale test data does not pertain to building materials, furnishings and related contents. ANSI/UL 94 small-scale test data is intended solely for determining the flammability of plastic materials used in the components and parts of end-product devices and appliances, where the acceptability of the combination is determined by UL. |
| Report Date: 1996-01-04 |
| Last Revised: 2025-11-14 |
 |
| © 2026 UL Solutions |
| ISO/IEC Flammability Properties | Value | Test Method | |
| Flammability |
IEC 60695-11-10
|
||
|
0.35 mm, Color: NC, BK
|
V-0
|
|
|
|
0.75 mm, Color: ALL
|
V-0
|
|
|
|
1.5 mm, Color: NC, BK
|
V-0
|
|
|
|
2.0 mm, Color: ALL
|
V-0
|
|
|
|
3.0 mm, Color: ALL
|
V-0
|
|
|
| Flammability |
IEC 60695-11-20
|
||
|
1.5 mm, Color: NC, BK
|
5VA
|
|
|
|
2.0 mm, Color: ALL
|
5VA
|
|
|
|
3.0 mm, Color: ALL
|
5VA
|
|
|
| Glow Wire Ignition Temperature (GWIT) |
IEC 60695-2-13
|
||
|
0.75 mm
|
800
|
°C
|
|
|
1.5 mm
|
800
|
°C
|
|
|
2.0 mm
|
985
|
°C
|
|
|
3.0 mm
|
985
|
°C
|
|
| Glow Wire Flammability Index (GWFI) |
IEC 60695-2-12
|
||
|
0.75 mm
|
960
|
°C
|
|
|
1.5 mm
|
960
|
°C
|
|
|
2.0 mm
|
960
|
°C
|
|
|
3.0 mm
|
960
|
°C
|