NORWE Spulenkörper / Elektronikbauteile

Component - Plastics		E41871
BASF SE
ENGINEERING PLASTICS EUROPE, E-KTE/MP - F206, LUDWIGSHAFEN 67056 DE
A3X2G5(f2)(r)
Polyamide 66 (PA66), glass reinforced, "Ultramid", furnished as pellets

	Min Thk	Flame			RTI	RTI	RTI
Color	(mm)	Class	HWI	HAI	Elec	Imp	Str
NC, BK	0.40	HB	4	0	110	115	-
	0.60	HB	2	0	110	115	-
NC, BK, GY	0.81	V-0	0	0	120	115	130
	3.0	V-0, 5VA	0	0	120	115	130
	1.5	V-0	0	0	120	115	130

Comparative Tracking Index (CTI):	0	Inclined Plane Tracking (IPT):	109 min at 1kV
Dielectric Strength (kV/mm):	19	Volume Resistivity (10^x ohm-cm) :	11
High-Voltage Arc Tracking Rate (HVTR):	1	High Volt, Low Current Arc Resis (D495):	6
Dimensional Stability (%):	0

(f2) -	Subjected to one or more of the following tests: Ultraviolet Light, Water Exposure or Immersion in accordance with UL 746C, where the acceptability for outdoor use is to be determined by UL.
(r) -	Virgin and regrind up to 50% by weight inclusive have the same flammability characteristics for black (BK) colored material only, excluding UL 746C suitability for outdoor use coverage (f2) and Incline Plane Tracking

ANSI/UL 94 small-scale test data does not pertain to building materials, furnishings and related contents. ANSI/UL 94 small-scale test data is intended solely for determining the flammability of plastic materials used in the components and parts of end-product devices and appliances, where the acceptability of the combination is determined by UL.

Report Date: 1974-10-24 Last Revised: 2012-01-19

IEC and ISO Test Methods

			Thickness
Test Name	Test Method	Units	Tested (mm)	Value
Flammability	IEC 60695-11-10, IEC 60695-11-20	Class (color)	0.40	HB75 (NC, BK)
			0.60	HB75 (NC, BK)
			0.81	V-0 (NC, BK, GY)
			3.0	V-0, 5VA (NC, BK, GY)
			1.5	V-0 (NC, BK, GY)
Glow-Wire Flammability (GWFI)	IEC 60695-2-12	C	-	-
Glow-Wire Ignition (GWIT)	IEC 60695-2-13	C	-	-
IEC Comparative Tracking Index	IEC 60112	Volts (Max)	-	-
IEC Ball Pressure	IEC 60695-10-2	C	-	-
ISO Heat Deflection (1.80 MPa)	ISO 75-2	C	-	-
ISO Tensile Strength	ISO 527-2	MPa	-	-
ISO Flexural Strength	ISO 178	MPa	-	-
ISO Tensile Impact	ISO 8256	kJ/m²	-	-
ISO Izod Impact	ISO 180	kJ/m²	-	-
ISO Charpy Impact	ISO 179-2	kJ/m²	-	-